Precautions before using the urea crusher

 Before using the urea crusher, you need to pay attention to the following matters to ensure the safe operation and efficient production of the equipment:

1. Equipment inspection: Make sure that the motor has been sealed before leaving the factory, the coupling has been calibrated, and loosening is strictly prohibited. Check whether all parts of the equipment are intact, whether they are loose, damaged or lost. Clean the iron impurities on the permanent magnet cylinder and the permanent magnet plate of the crusher feeder regularly.

2. Safety and environment: The organic fertilizer equipment should be installed on a horizontal concrete foundation, other fixed horizontal surfaces, and fixed with bolts. Ensure that the power supply meets the equipment requirements to avoid voltage instability or leakage. Check whether the lubricating oil is sufficient and clean, and whether the seal is good.

3. Trial run: Perform a no-load test run before use to ensure that the equipment operates normally. Pay attention to the vibration and noise of the equipment during operation. If any abnormality is found, stop the machine immediately for inspection.

4. Maintenance and care: Clean or replace the dust collector bag regularly to ensure good air permeability. Check the fineness of the crushed finished product regularly to ensure that it meets production requirements. Regularly check the wear of each wearing part and replace the seriously worn parts in time. The main shaft bearing should be filled with lubricating oil after every 40 hours of operation, and the lubricating oil should be replaced regularly.

5. Operation specification: The operator should read the product manual carefully and understand the structural principle and operation procedures of the equipment. Avoid long-term overload operation of the equipment and pay attention to the operation status of the equipment.

Through the above steps, it can be ensured that the urea crusher is in good working condition before use, reduce equipment failures, and improve production efficiency and safety.



Comments

Post a Comment

Popular posts from this blog

Promoting effect of organic fertilizer equipment on straw fermentation

Image
  The promoting effect of  organic fertilizer equipment   on straw fermentation is mainly reflected in the following aspects: 1. Improve fermentation efficiency:  Organic fertilizer production line   through high temperature fermentation and mechanical flipping, accelerate the decomposition of cellulose, hemicellulose and other organic materials in straw, shorten the fermentation cycle. 2. Optimize fermentation conditions: By adjusting temperature, humidity and other parameters, fermentation conditions can be further optimized to improve the quality and yield of organic fertilizer. 3. Reduce pests and diseases: In the fermentation process, high temperature can kill pathogens, weed seeds and roundworm eggs in the straw, and produce bioorganic fertilizer with strong stability and complete nutrient types. 4. Improve soil structure: Organic fertilizer is rich in organic matter and a variety of trace elements, which can significantly improve soil structure, enhance s...
Read more

15t/h sulfur-coated urea fertilizer production process and analysis

Image
Advantages of sulphur-coated urea fertilizer Sulfur coated urea, also known as sulfur coated urea, sulfur coated urea, controlled-release urea, is a new type of slow-release fertilizer. Similar to NPK granular fertilizer processed by rotary drum granulator , the product has the function of slow release and controlling fertilizer effect. According to different growth stages of crops, releasing nutrients according to nutrient requirements can reduce nutrient loss, improve fertilizer utilization, save resources and protect the environment. This product is not only an ecological and green agricultural product, but also a new type of product to replace common urea in the future. 1. The empty shell of sulfur fertilizer can store water. Through the soil, it can drive away the sterilization. Sulfur fertilizer and its compounds have been successfully applied to the improvement of saline alkali soil. 2. The product can not only supply sulfur to the soil, improve the yield of crops, but also...
Read more

How to improve the fermentation efficiency of organic fertilizer production line

Image
  Improving the fermentation efficiency of  organic fertilizer production lines   can be achieved by: 1. Choose the right fermentation equipment: according to the production scale and raw material characteristics, choose the right fermentation equipment. 2. Regular maintenance of the equipment: to ensure that the  organic fertilizer equipment   is in good working condition, regular cleaning, lubrication and inspection, timely replacement of worn parts to improve the operating efficiency of the equipment. 3. Control fermentation parameters: strictly control the temperature, humidity, ventilation and other parameters in the fermentation process, and ventilation should ensure sufficient oxygen supply to promote microbial activity and accelerate the fermentation process. 4. Adding microbial inoculants: Adding an appropriate amount of microbial inoculants in the fermentation process can improve the fermentation speed and quality. For example, adding Nongfukang fecal ...
Read more