How to check whether the lubrication system of organic fertilizer equipment is normal
To check whether the lubrication system of organic fertilizer equipment is smooth, you can refer to the following methods:
1. Check the quality and quantity of lubricating oil: check the oil level of lubricating oil regularly to ensure sufficient oil. Observe the color and viscosity of the lubricating oil, if the lubricating oil is found to be deteriorated, it should be replaced in time.
2. Check the components of the lubrication system: check whether the oil filter, oil pan, oil pipe and other components are in good condition to ensure that they are not blocked or damaged. Check the tightness of the lubrication system to ensure that there are no leaks.
3. Check the working pressure of the lubrication system: ensure that the working pressure of the lubrication system is within the normal range. If the pressure is abnormal, the cause should be found and eliminated.
4. Check the oil temperature of the lubrication system: regularly check the temperature of the lubricating oil to ensure that it is within the normal working range. If the oil temperature is too high or too low, it should be adjusted in time.
5. Check the flow of the lubrication system: under nominal pressure and nominal flow, the flow of the lubrication system should meet the design requirements. If the flow rate is abnormal, check whether the lubrication pump and line are blocked.
6. Check the alarm device of the lubrication system: check whether the alarm device of the lubrication system works normally, such as oil level alarm, pressure alarm, etc. If the alarm device fails, it should be repaired in time.
7. Regular lubrication system test: according to the technical document requirements of the organic fertilizer production line, regular pressure resistance and sealing test of the lubrication system. The test pressure should be gradually increased, can not reach the peak at one time, and the pressure holding time after reaching the test pressure is not less than 10 minutes. Through the above inspection methods, it can effectively determine whether the lubrication system of organic fertilizer equipment is smooth and ensure the normal operation and service life of the equipment.
Comments
Post a Comment