Operating disc granulator organic fertilizer equipment should pay attention to matters
Organicfertilizer granulation equipment: the granulation of mixed fertilizer is an
important process of granulation process, it is not only related to the
internal and external quality of the product, but also related to the size and
cost of production, and the granulation production process in addition to the
material and chemical properties of the material itself, but also closely
related to the form and mechanical properties of granulation equipment. The
main types of Npk fertilizer granulating equipment are disc granulator, drum granulator, biaxial
granulator, extrusion granulator and spray granulator and so on.
Matters needing
attention when operating disk granulator:
1. Water
quantity: control of water content in operation of disc granulator of organic
fertilizer equipment. When the disc granulator is running, the skew disk
granulator is used. The granulation process requires a high water content, and
poor water control can lead to a decrease in granulation speed.
2. Materials: Pay
attention to the quality of various materials to ensure that sundry, large and
large particles are not mixed into the feed. In addition, they should also pay
attention to the temperature of the equipment feed, because if the temperature
of the die head is too high, the material can easily break and stick to the die
head after starting.
3. Disk
inclination: pay attention to the change of disk granulator inclination when
operating. The disk granulator has a certain dip Angle. If the inclination
changes due to accidents, it will also affect the granulation rate of organic
fertilizer particles, and also affect the service life.
4. Body
temperature: The operator should also pay attention to the temperature change
of the body at any time. During the normal operation of the granulator, the
operator should maintain a stable machine temperature, do not let the
temperature rise and fall.
5. Speed: When
using the disk granulator, in order to ensure that the particles produced are
uniform, smooth and complete, attention should be paid to ensure that the feed
is uniform and sufficient. The feed speed and feed speed of the equipment
should be properly matched to avoid the decline of particle quality and output.
Comments
Post a Comment