Technical requirements of bucket elevator for organic fertilizer equipment

 The bucket elevator in the organic fertilizer equipment is an important equipment for transporting organic materials (such as organic fertilizer, straw, etc.), and its technical requirements mainly include the following aspects:

1. Wear resistance and corrosion resistance: bucket elevator may have a high risk of wear and corrosion when handling organic materials, so the selection of materials and the treatment of coatings need to have excellent wear resistance and corrosion resistance to ensure the long-term stable operation of the equipment.

2. Structural strength: The structural strength of the equipment needs to be sufficient to withstand the shock and vibration during transportation, especially in the case of high load and frequent use, to ensure the safety and reliability of the equipment.

3. Conveying capacity and efficiency: Determine the conveying capacity and efficiency of the elevator according to the actual process requirements of the organic fertilizer production line, including the reasonable setting of parameters such as lifting height, conveying speed and hourly processing capacity to maximize the production efficiency of the equipment.

4. Safety and operation convenience: The equipment should have good safety protection measures to prevent personnel from misoperation and accidental injury. At the same time, the operation interface should be simple and clear, easy for the operator to monitor and adjust.

5. Environmental performance: The equipment should consider environmental requirements when designing, minimize noise and dust emissions, and comply with relevant environmental regulations and standards.

6. Maintenance and maintenance: The maintenance of the equipment should be simple and effective, including easy cleaning, lubrication and parts replacement, so as to extend the service life of the equipment and ensure the continuous operation of the equipment.

Considering the above technical requirements, the design and selection of the appropriate bucket elevator is of great significance for the operating efficiency and equipment life of organic fertilizer equipment.


Comments

Post a Comment

Popular posts from this blog

How much moisture is required for organic fertilizer granulation?

Image
  Organic fertilizer granulator   in the whole process of production and processing, the material is required to have a certain viscosity , and some raw materials are loose after fermentation, and it is not easy to granulate, so it is necessary to add some water or adhesive to improve the viscosity of the material.  Disc granulator   and wet test granulation, water or adhesive will be added in the whole process of granulation to ensure that the material can be fully granulated. The  new  type  organic fertilizer granulator  uses wet test granulation, and the material after fermentation can be granulated immediately, without the operation process of other production processes. The roller extrusion granulator adopts the production process without boring and tasteless at room temperature, and the granulation of materials with relatively low viscosity can be used. If the moisture content of the material is too high, you can moderately add some dry materials to melt the moisture content. If
Read more

Why choose NPK fertilizer granulator? How to deal with agglomeration?

Image
At present, NPK fertilizer granulator is widely used in organic fertilizer granulation. It is used in animal manure, wet compost, green manure, sapropel peat, cake fertilizer, urban domestic waste, etc. How to deal with the agglomeration of fertilizer granulator? After purchasing organic fertilizer raw materials, the materials will agglomerate. According to the market research, there are some agglomeration problems in the granulation of roller extrusion granulator or new type organic granulator. However, organic fertilizer production line packaging particles, should be qualified products without caking. How to solve the problem? Raw materials of organic fertilizer granulation process may be affected by fecal storage and transportation. In addition, it is related to weather and other aspects. For example, on rainy days, the surface of raw materials will get wet. It then becomes larger and more extensive, leading to caking. It is agglomerated because of improper long-term storag
Read more

Basic configuration and working principle of organic fertilizer production line

Image
  Organic fertilizer equipment   can process raw materials rich in organic matter into ideal organic fertilizer sales, so as to obtain profits. The raw materials for the production of organic fertilizer are widely sourced, such as various livestock and poultry manure, urban sludge, animal and plant residues, etc. These raw materials are rich in organic matter, nitrogen, phosphorus, potassium and other crop production nutrients. And the purchase price is very low. The equipment required for the  organic fertilizer production line  includes fermentation, crushing, mixing, granulation, drying, cooling, screening, automatic packaging, belt transportation, coating equipment, etc. The working principle of organic fertilizer production line: collect raw materials, and then mix raw materials according to the required formula, adjust the water and carbon nitrogen ratio of raw materials, and start fermentation; After fermentation, the material is crushed by grinder. The pulverized material forms
Read more